13 On Monitor 2 (To display live orrecorded images)The negative circled number q indicates the camera titledefault position.Notes:• The same images displayed on monitor 2 will be dis-played on the VGA monitor.• The camera title will be displayed with 16 characters (2lines: 8 characters per line).• When monitor 2 is selected, it is possible to switch theway of displaying the camera title in the following orderby pressing the camera selection button 8 for the WJ-HD316A (the camera selection button 6 for the WJ-HD309A) while the shift function is on (by pressing theSHIFT button):Display the camera title → Display the camera title inlist form → Not display the camera title• When playing images recorded after selecting "ON" for"Embedded REC (Time & Date)", the embedded abbre-viation of the recording mode (event recording/emer-gency recording) will be displayed.The abbreviations are as follows:EVT: Pre-/post-event recordingEMR: Emergency recording• In case that "ON" is selected for "Embedded REC (Title)"and also "R-UPPER" or "R-LOWER" is selected for thecamera title position, when playing images recordedwith the resolution setting "SIF", a part of the embeddedcamera title may not be displayed.Important:• Since the VGA output from this unit is the same as fortelevisions (720 H x 480 V pixels/vertical frequency of59.94 Hz), it may be possible that both the left and rightedges can not fit onto the screen depending on theVGA monitor.• It is impossible to use the MONITOR (VGA) connectorwhen connecting the unit in the cascade connection.• It may take time to display live images on the VGA mon-itor if the VGA monitor is turned on/off when the unit isrunning.1. Camera TitleDisplays the edited camera title.A position to display the camera title can be selectedfrom the following.Upper left, upper right, lower left, lower right, centerThe default camera title position is upper right (R-UPPER).2. Task BarDisplays the current status.The task bar consists of the main bar (w - A), the leftbar (w - B), and the right bar (w - C).There are 3 different ways to display the task bar as fol-lows.Mode 1Displays only the main bar and the status is displayedon it.Mode 2Displays the status on the main bar, the left bar and theright bar.Mode 3Displays the status only on the main bar, and does notdisplay information on the left bar and the right bar.Note: Mode 2 and Mode 3 are graphic operated. Theymay not be as clear as Mode 1.qq qqqw – Aw–Bw–C