Panasonic WJ-HD309A Operating Instructions Manual

Also see for WJHD309A - DIGITAL DISK RECORDER: Reference Reference Manual Operating instructions Conversion guideline

Contents

Panasonic WJ-HD309A Operating Instructions Manual Manual pdf 97 page image

97Resolution[Screenshot 2]The REC Camera pop-up menu will be displayed.x Select the desired camera channel for manual record-ing/event recording using the arrows button (C D AB) and rotate the jog dial. It is possible to select a cam-era channel by pressing a camera channel selectionbutton (1 - 16 for the WJ-HD316A, 1 - 9 for the WJ-HD309A) on the front panel of the unit.c Press the SETUP/ESC button.→ The settings will be applied and the "REC camera"pop-up menu will be closed.8 ResolutionSelect a recording resolution from the following.FRAME 3D ON: High resolution (720 x 480), with camerashake compensationFRAME 3D OFF: High resolution (720 x 480)FIELD: Standard resolution (720 x 240)SIF: Low resolution (360 x 240)Recording will not be performed for around 4 secondswhen the SETUP MENU (Quick) was closed after changingthe settings.Note: It is possible to minimize blurring to record fast mov-ing objects by selecting "FRAME 3D ON".8 Manual RECPerform the recording rate (REC Rate) and the image quali-ty (Quality) for manual recording.The following are available for the recording rate.OFF/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/60 ips/120 ipsNote: The available recording rate differs depending on theselected solution. [REC & Event]Perform the settings for the basic recording and the set-tings for event actions of each event type (motion detection,video loss, command alarm and terminal alarm.)8 REC TypeSelect "QUICK" or "ADVANCED" for validation of the record-ing settings.QUICK: The recording settings set on the SETUP MENU(Quick) will be validated when recording.ADVANCED: The recording settings set on the SETUPMENU (Advanced) will be validated when recording.Note: When "QUICK" is selected for "REC Type" of "REC &Event", the SETUP MENU (Quick) will be displayed bypressing the SETUP/ESC button for 2 seconds or more.When "ADVANCED" is selected for "REC Type" of "REC& Event", the SETUP MENU (Advanced) will be dis-played by pressing the SETUP/ESC button for 2 sec-onds or more.8 REC CameraSelect a camera channel for manual recording/eventrecording.[Screenshot 1]Start operation from the "REC & Event" menu.z Move the cursor to "REC Camera" using the arrows but-ton (C D) and press the SET button.SETUP MENU LIVEQuickDisplayREC & EventNetworkAdvanced Menu REC Type REC Camera Resolution Manual RECREC RateQuality Event RECREC RateQualityTimeOperation Mode Event Setup Power ON Manual REC VMD SetupQUICKSETUPFIELD30ips / 16CHFQB30ips / 16CHFQB30sALARMSETUPOFFSETUPSETUP MENU LIVEQuickDisplayREC & EventNetworkAdvanced Menu REC Type REC Camera Resolution Manual RECREC RateQuality Event RECREC RateQualityTimeOperation Mode Event Setup Power ON Manual REC VMD SetupQUICKSETUPFIELD30ips / 16CHFQB30ips / 16CHFQB30sALARMSETUPOFFSETUPSETUP MENU LIVEQuickDisplayREC & EventNetworkAdvanced Menu REC Type REC Camera Resolution Manual RECREC RateQuality Event RECREC RateQualityTimeOperation Mode Event Setup Power ON Manual REC VMD SetupQUICKSETUPFIELD30ips / 16CHFQB30ips / 16CHFQB30sALARMSETUPOFFSETUPREC Camera1 2 3 4 5 6 7 89 10 11 12 13 14 15 16FRAME 3D ON/FRAME 3D OFFFIELDSIFMaximum recording rate30 ips60 ips120 ipsNote: The camera channel number selected for "RECCamera" will be displayed next to the selected record-ing rate.