Panasonic WJ-HD309A Operating Instructions Manual

Also see for WJHD309A - DIGITAL DISK RECORDER: Reference Reference Manual Operating instructions Conversion guideline

Contents

Panasonic WJ-HD309A Operating Instructions Manual Manual pdf 143 page image

143160GB: Indicates the hard disk capacity (disk existed whenlast started up)160GB M: Indicates the hard disk capacity (mirrored diskexisted when last started up)ADD (160GB): Indicates that this hard disk is newly mount-ed at this startup, but that it was not mounted last time.Those parenthesized numbers indicate the capacity ofthe hard disk.ADD (ERROR): Indicates that this hard disk is newlymounted at this startup, but that it was not mounted lasttime. Then, an error is detected on the hard disk.* (160GB): Indicates that a different hard disk from the onethat existed at the last startup is mounted. Those paren-thesized numbers indicate the capacity of the harddisk.* (ERROR): Indicates that a different hard disk from the onethat existed at the last startup is mounted, and an errorhas been detected on the hard disk.LOST: Indicates that a position where a hard disk wasmounted at the last startup has no hard disk.–: Indicates that a hard disk is not mounted this time norwas it at the last startup. Display of the HDD DISK MENUInformation of the hard disk drive of the unit or the optional extension unit will be displayed on the "HDD DISK MENU".Digital Disk RecorderWJ-HD300AHDD DISK MENUTOP MENUFORMAT MIRROR ON REMOVE LINK RESTART EXITMIRROR OFFInformation of recording areas : [SETUP/ESC] OK : [SET]160GB160GB160GB160GB*(160GB)ADD (160GB)160GBLOSTMAINEXT1EXT2EXT3EXT4EXT5EXT6EXT7160GB160GB160GB160GB*(ERROR)ADD (ERROR)160GB-160GB160GB160GB160GB160GB160GB-160GB160GB160GB160GB160GB160GB-- -1 2 3 4Main unit/optional extension unitInformation about hard disk located in the main unit and optional exten-sion unitERROR: Indicates that the hard disk has failed to be initial-ized.Important:• It is impossible to operate the unit when there is a harddisk with indications of * (capacity), * (ERROR), LOSTor ERROR. In this case, remove the relevant hard disk.(Refer to page 151.)• Hard disks with ADD (capacity) indication are not initial-ized yet.First, initialize them. It is impossible to record images onit or to use it as a copy destination without initialization.Note: The displayed available disk space on this menu willnot include the space required for data management.Therefore, the understated available disk space will bedisplayed.It is possible to display information about the recordingarea (allocated disk size for normal recording area,event recording area and copy area) by pressing theSETUP/ESC button while displaying the "TOP MENU" ofthe "HDD DISK MENU". About the HDD DISK MENUThe operations regarding the hard disk can be performed by displaying the "HDD DISK MENU" on monitor 2.The "HDD DISK MENU" will be displayed when the SET button is pressed while displaying the system check complete window.The "HDD DISK MENU" will also be displayed automatically after replacing or removing the hard disk.The following operations can be performed on the "HDD DISK MENU".Setting itemFORMATMIRROR ONDescriptionFormats (initializes) the hard disk. It can also change the setting values forthe recording area respectively. Mirroring can also be started on this menu.Recovers the mirrored hard disk.Page145150MIRROR OFFREMOVERESTARTCancels mirroring.Removes the hard disk drive from the system logically.Restarts this unit.150151–EXIT Closes the "HDD DISK MENU". –