172The camera image is dim.The log-in menu does notappear even if you press thebutton of the unit.Displayed image does not fit inthe screen.• Check if the power is supplied to cameras and connecteddevices.• Check if the power plug is properly connected to the ACoutlet.• Check if the power cord is properly inserted into the powersocket of the unit.• The HDD SAFETY MODE is set to ON.In this case, set the HDD SAFETY MODE to OFF.• Check if the lens covers of the cameras have beenremoved.• Check if dust may be sticking to the camera lens.• Check if any user has logged in with the system controller.This is not a malfunction. Images may not fit in the screen ofsome monitor models because of their resolutions.• Can the users display the SETUP MENU on the monitors?Check the level settings of the users logging in.• Check if monitor 1 is used to display the SETUP MENU.The SETUP MENU cannot be displayed on monitor 1.• Check if the cable connections are correct.• Check the brightness and contrast settings of the moni-tors.• Can the users display camera images on the monitors?Check the level settings of the users logging in.Power is not turned on.The HDD SAFETY MODE win-dow is displayed after turningon the power of the unit.Check item/Remedy PageTROUBLESHOOTINGProblemNo camera image is displayedon MON 1, MON 2, and theVGA monitor.Cannot open SETUP MENU.––––Refer to p. 107and 110.Refer to page12.–Refer to p. 72.–Refer to p. 107and 110.––Refer to p. 69.Check the following before requesting repair.Contact your dealer if a problem cannot be solved even after checking and trying the solution or a problem is not describedbelow, and when having a problem with installations.
