44 Sequential DisplayDisplayed images from cameras will be switched automati-cally.Camera images will be displayed sequentially according tothe settings performed in advance.z Press the MONITOR1/MONITOR2 button toselect the monitor.When monitor 1 is selected, the indicator will light.When monitor 2 is selected, the indicator will not light.x Press the SHIFT button.The SHIFT indicator will light.c Press the SEQ button.The camera selection button respective to the displayedimage will light green or blue.To stop sequential display, press the SEQ button.When trying to display on a single screen or multi-screenduring the sequential display, the sequential display will bestopped.When monitor 2 is selected in step 1, the sequential displaywill also start on the VGA monitor.Notes:• It is possible to skip a sequential step (camera channel)if no video input is supplied (Auto skip function). Referto a system administrator for further information.• Cameras that are out of the controllable range set bythe camera partitioning function will be skipped. Referto the Network Setup Instructions (PDF) for further infor-mation about the camera partitioning.R2RMONITOR1MONITOR2159132610/014371115481216SEQSHIFT OSDSTOP PLAY PAUSE REC - REC STOPZOOM/FOCUSTEXTCOPYDISK SELECTEL-ZOOMMARKLOGOUTIRISPRESET/AUTOA-BREPEATGOTOLASTLISTEDSEARCHBUSYSETUP/ESCSETREV– +FWDPAN/TILTSLOW[WJ-HD316A]LOGOUTR2RMONITOR1MONITOR21472580369TEXTSEQSHIFT OSDZOOM/FOCUSCOPYDISK SELECTEL-ZOOMMARKIRISPRESET/AUTOA-BREPEATGOTOLASTLISTEDSEARCHBUSYSETUP/ESCSETREV– +FWDSTOP PLAY PAUSE REC - REC STOPPAN/TILTSLOW[WJ-HD309A]PAN/TILTPAN/TILTz cxz cx• When the GO TO LAST button is pressed for 2 secondsor more while displaying live images, playback of thelatest recorded images will start. (At the default setting,playback will start from 5 seconds before the start timeof the latest recorded images.)