122Configure the settings and operations relating to hard disk drives [Disk]Select the [Disk] tab of the "Maintenance" page. (☞ Page 60)The settings relating to an action to be taken when available capacity of the hard disk drives run out (Disk end mode) and whenthe capacity of hard disk drives is warned (HDD capacity warning) can be configured, data recorded on the hard disk drives canbe deleted and SD memory cards can be formatted on this tab.It is also possible to display the disk configuration page that is used to manage the hard disk drives, for example, when configur-ing the recording areas and when formatting the hard disk drives on this tab.■ Disk end mode[NML rec.]Displays the disk end mode for the normal recording areas.Normally, "Continue" has been selected and it is impossibleto change the setting value.The oldest data will be overwritten and saved as new datawhen capacity of the normal recording area has run out.[EVT rec.]Select the disk end mode for the event recording areas.Continue: The oldest data will be overwritten and savedas new data when the available space has run out.Stop: Recording will stop when the capacity has run out.Default: Continue■ HDD capacity warning[NML rec.]If the available capacity of the normal recording areas reach-es a specified level, a warning will be performed.When "Off" is selected, warning will not be performed.1% - 10%Default: Off[EVT rec.]If the available capacity of the event recording areas reachesa specified level, a warning will be performed. When "Off" isselected, warning will not be performed.1% - 10%Default: Off[Hour meter warning]If the operation time of a hard disk drive reaches a specifiedlevel, a warning will be performed. When "Off" is selected,warning will not be performed.10000h/20000h/30000h/40000h/50000hDefault: 20000h■ Data deletionDeletes the data from the hard disk drives.The two ways to delete data are auto deletion and manualdeletion by designating the date.• [HDD auto deletion]Configure the settings to delete data automatically whenthe set days have passed from the day the images wererecorded.When "Off" is selected, data will not be deleted automat-ically.1day/2days/3days/4days/5days/6days/7days/8days/9days/10days/14days/30days/1month/45days/60days/90days/120days/150days/180daysDefault: Off• [HDD manual deletion]By setting the time & date and the recording area todelete (normal recording area/event recording area),images on the hard disk drive that were recorded upuntil a day before the set time & date will be deleted.Select the [Delete] button after setting the time & date.[SD card format]Formats an SD memory card inserted into the recorder.Select the [Execute] button to start formatting.[HDD menu]The disk configuration page will be displayed. Select the[Setup] button to display the disk configuration page.Clicking the [Setup] button will open the camera registrationwindow.Refer to page 127 for further information about the disk con-figuration page.
