97Configure the settings relating to the mail notification [Mail]Select the [Mail] tab on the "Server" page. (☞ Page 60)The settings of alarm mail notice, the settings of error report mail (☞ Operating Instructions (PDF)) and the settings to use the mailfunctions can be configured on this tab.[SMTP server address]Enter an IP address or a name of the SMTP server to sende-mails. The name of the SMTP server is available only whenselecting "Manual" or "Auto" for the "Network" page - the[DNS] tab. Enter up to 255 alphanumeric characters includ-ing hyphens (-) and periods (.).[SMTP port number]Enter the port number of the SMTP server.00001 - 65535Default: 00025[POP server address]Enter an IP address or name of the POP server to be usedfor POP before SMTP authentication.The name of the POP server is available only when selecting"Manual" or "Auto" for the "Network" page - the [DNS] tab.Enter up to 255 alphanumeric characters including hyphens(-) and periods (.).[Type]Select the authentication method to send e-mails from thefollowing.None/POP before SMTP/SMTPDefault: None[Type - User name]Enter the user name to be required for the authentication.Enter up to 32 alphanumeric characters excluding "&" listedin the description of "Available characters". (☞ Page 96)[Type - Password]Enter the password to be required together with the username for the authentication. Enter up to 32 alphanumericcharacters excluding "&" listed in the description of"Available characters" (☞ page 96). An entered character forthe password will be displayed as "∗" or "·".[Sender's address]Enter the mail address of a sender. Entered mail addresseswill be displayed in the "From" (sender) line. Enter up to 255alphanumeric characters including hyphens (-), periods (.),underscore marks (_) and @.■ Destination address[Address1]Enter the mail addresses of the recipients of the alarm mail(☞ Operating Instructions (PDF)) and the warning mail (☞Operating Instructions (PDF)). Enter up to 255 alphanumericcharacters including hyphens (-), periods (.), underscoremarks (_) and @.Check the desired mail type (Warning/Alarm) to be sent.Up to 4 destinations can be registered. To add destinations,select the [Setup] of "Other destinations".
