69Settings for emergency recording [Emergency rec.]Select the [Emergency rec.] tab on the "Basic" page. (☞ Page 60)The settings relating to emergency recording such as recording duration and recording rate can be configured on this tab. Referto Operating Instructions (PDF) for further information about the emergency recording.[Resolution]Select a resolution for images to be recorded.Field: Standard resolution (704 x 240)Frame 3D On: High resolution (704 x 480) with themotion blur compensation functionFrame 3D Off: High resolution (704 x 480)Default: Field[Recording duration]Specify the recording duration of emergency recording.The following are available for the recording duration.2s/5s/10s/20s/30s/1min/3min/5min/10min/30minManual: Recording will continue while the external switchis being held down. Recording will be performed forat least 8 secondsContinue: Recording will not stop unless the [ALARMRESET] button on the front panel (operating section)of the recorder is pressed or the [ALM] button in thestatus display area is clicked.Default: 10s[Rate(ips)]Select the recording rate for each camera channel.Default and available values differ depending on the settingof "Resolution".When "Off" is selected for a specified camera channel, imag-es from a camera channel set to "Off" will not be recorded.• When "Frame 3D On" or "Frame 3D Off" is selectedfor "Resolution"Off/1ips/2.1ips/3.1ips/6.25ips/12.5ips (Only forHD716K/G)Default: 6.25ips (12.5ips for HD716K/G)• When "Field" is selected for "Resolution"Off/1ips/2.1ips/3.1ips/6.25ips/12.5ips/25ips (Only forHD716K/G)Default: 12.5ips (25ips for HD716K/G)[Quality]The following are available for the image quality.XF (Extra Fine): Extra fine qualitySF (Super Fine): Super fine qualityFQ (Fine): High qualityNQ (Normal): Standard qualityEX (Extended): Low quality (Recording for a long periodof time)Default: FQ
