59!1 [Maintenance] buttonSelect this button to display the "Maintenance" page(☞ page 119).The following can be carried out on the "Maintenance"page:• Check and setup of the hard disk drive informationof the recorders and the extension units• Management of the setup data and check of loginformation• Formatting SD memory cards and displaying thedisk configuration page!2 [Exit] buttonExits the setup menu when finishing the operation ofsetup menu. The settings will be applied.!33 Setup pageDisplays each setup page. There are tabs for somesetup pages.How to operate the setup menuThe settings required to operate the recorder are configured on the setup menu in advance.The setup menu is displayed on Monitor 2.Note:• The setup menu can also be displayed by holding down the [SETUP/ESC] button (for more than 2 seconds) on the frontpanel of the recorder.• At the startup of the setup menu for the first time, "Quick" page will be displayed as the top page of the setup menu.After operating the recorder on the "Quick" page or each setup page, the "Basic" page (☞ page 65) will be displayed as thetop page of the setup menu from the next time.Operations using the buttonson the front panelStep 1Display the setup menu.Display the sub menu by pressing the [SUBMENU] button, move the cursor to "SetupMenu", and press the [SET] button using thearrows button (C D A B)→ The setup menu window opens.Note:• While live images are being displayed, hold down the[SETUP/ESC] button for more than 2 seconds.Operations using a mouseStep 1Display the setup menu.Click "S.Menu" on the status bar below the screen, and click"Setup Menu" on the "Sub Menu" window.SUBMENU➜SET
