Panasonic WJ-MPU955 Operating Instructions Manual

Also see for WJMPU955 - PROCESSING UNIT - TMU: User guide User guide

Panasonic WJ-MPU955 Operating Instructions Manual Manual pdf 35 page image

35Camera Function Control Camera SetupThe following function requires the use of camerasequipped with this specific feature.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Pressing the [F4] key while holding down the [SHIFT]key will gain access to the Camera Setup Menu displayon the active monitor.3. Select the desired item in the menu by moving theJoystick Controller UP and DOWN, and then select thedesired parameter (or mode) in the menu by movingthe Joystick Controller L and R.Press the [CAMERA (ENTER)] key to execute the cur-rently highlighted selection and to enter a submenu ofthe Camera Setup Menu, or press the [CLEAR (ESC)]key to leave the currently selected menu and return tothe previous page of the menu.4. Press the [RESET] key in the menu to reset the para-meter of a selected item to the factory default setting orenter the Special Camera Menu when the cursor ispositioned on SPECIAL in the menu.Pressing the [RESET] key while holding down the[SHIFT] key will restore all factory default settings.Notes:• Refer to the Operating Instructions of the selectedcamera for more details.• Moving the joystick while holding down the [SHIFT]key will move the camera smoothly for presettingthe position in the camera setup menu.5. To close the Camera Setup Menu, press the [F3] keywhile holding down the [SHIFT] key. Changing to Black and WhitePicturesThe following function is available only when specified cam-eras having a color-black and white switching feature areused.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Press the [F6] key two times."B/W Change" as shown in the figure will appear on theLCD display of the controller.3. Press the [1] key to change the picture from color toblack and white on the active monitor.4. Press the [2] key to change black and white to colorpicture on the active monitor.5. To exit from the mode, press the [CLEAR (ESC)] key.Note: When the black and white parameter is setAUTO in the camera setup menu, this function isdisabled.INFORMATIONCam Menu OnALARM ACK RESETALLRESETARMGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDF.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RWIDE TELEAUTO FOCUSZOOMMONITORLOCKOSD SERVICELOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFF DEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITAREAAUX2 OFF AUX2 ONDEFAULTFOCUSVERCAMFUNCCAMERA(ENTER)AUTO PANINFORMATIONB/W change1:On2:OffARM F.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RWIDE TELEAUTO FOCUSZOOMLOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFF DEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITAREAAUX2 OFF AUX2 ONDEFAULTFOCUSCAMFUNCCAMERA(ENTER)AUTO PAN