Panasonic WJ-MPU955 Operating Instructions Manual

Also see for WJMPU955 - PROCESSING UNIT - TMU: User guide User guide

Panasonic WJ-MPU955 Operating Instructions Manual Manual pdf 50 page image

Auxiliary ControlThe following function is available only when the WV-RC100or WV-RC150 Receivers are included in the system.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Pressing the [2] button while holding down the [SHIFT]button will turn on the user’s auxiliary switch 1 of theReceiver.Pressing the [1] button holding down the [SHIFT] but-ton will turn off the user’s auxiliary switch 1 of theReceiver.3. Press the [5] button while holding down the [SHIFT]button will turn on the user’s auxiliary switch 2 of theReceiver.Pressing the [4] button while holding down the [SHIFT]button will turn off the user’s auxiliary switch 2 of theReceiver.50 Receiver Control Camera Housing ControlThe following function is available only when the WV-RC100or WV-RC150 Receivers are included in the system and thespecified camera housing is installed.• Wiper Control1. Select the desired monitor and camera.Refer to the Monitor Selection and CameraSelection.2. Pressing the [3] button while holding down the[SHIFT] button will turn on the Housing Wiper ofthe camera until buttons are released.• Defroster Control1. Select the desired monitor and camera.Refer to the Monitor Selection and CameraSelection.2. Pressing the [8] button while holding down the[SHIFT] button will turn on the housing defroster ofthe camera.To turn off the defroster, pressing the [7] buttonwhile holding down the [SHIFT] button.AUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONMON STATUSSHIFT BLK EXITAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLCLEAR(ESC)DEF OFF DEF ONMON STATUSAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONMON STATUS