53Running Sequence Tour SequenceThe following functions are available only if a TourSequence has been previously established through theAdministration Console. As described on the setup, any ofthe tours can be assigned to any of the monitors.1. Select the desired monitor.Refer to the Monitor Selection.2. Select the desired Tour Sequence Number by pressingthe numeric buttons.3. Pressing the [TOUR SEQ] button will run the toursequence in forward direction on the active monitor.The selected Tour Sequence Number (T8) with "R" sign(indicate running status) is displayed on the activemonitor.4. Press the [PAUSE] button to pause a Tour Sequencethat is being run on the active monitor.The "P" sign (indicating the pause status) is displayedat the Tour Sequence Number on the active monitor,and a camera number currently selected is displayedon the LED display.5. Press the [TOUR SEQ] button to restart a TourSequence forward from the next step that was previ-ously paused by pressing the PAUSE button.6. Press the [TOUR SEQ] button while holding down the[SHIFT] button to restart a Tour Sequence backwardfrom the next step that was previously paused bypressing the PAUSE key.7. Press the [NEXT] button to move the sequence oneframe to the next step (in forward or reverse run direc-tion) from the step that was previously paused bypressing the PAUSE button.8. Press the [PREV] button to move the sequence oneframe to the previous step (in forward or reverse rundirection) from the step that was previously paused bypressing the PAUSE button.9. To return to Spot monitoring, press the [STOP] buttonto end a Tour Sequence that is being run on the activemonitor.AUX1 OFFALM SCAM IDT&DAUX1 ONVLD SNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICEOSDGENWIPERSYS SAUX2 OFFALM HMON STATUSAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ON

IMPORTANT SAFETY INSTRUCTIONS

Introduction

Central Processing Unit

I Mounting into the Rack

Connect with System Devices

I CPU Switch Unit

I Digital Video Encoder Devices

I Digital Video Decoder Devices

I Setup Layer 3 Switching (L3SW)

Network Security System Examples

I Redundant System

Main Features

I Alarm Programming and Handling

Default SYS.INI Configuration

Default Database Contents

OPERATING PROCEDURES (with WV-CU850)

Log-in and Log-out

Monitor and Camera Selection

I Priority Lock

Display Setting for Controller

Controlling Camera Site Accessories

I Receiver Control

Camera Function Control

I Patrol Learn and Play

Running Sequence

Monitor Display Control

Alarm Control

Other Functions

OPERATING PROCEDURES (with WV-CU360C)

I IDs Display Function

TROUBLESHOOTING

Specifications

Panasonic WJ-MPU955 Operating Instructions Manual

W ELCOME

WHAT IT DOES

I NSTALL

INSTALLATION

O PERATION

Toolbar

PC Time Setup

Time Zone

Setting Main CPU IPA

NSS Setup

Changing Main CPU

Transfer Settings

U NINSTALL

G LOSSARY

TERMS

WJMPU955 - PROCESSING UNIT - TMU

Welcome

How It Works

Installation

Installing MPU955 Admin Console

Configuration

Instructions

Starting the Program

First Time Operation

Scheduled Modes

Main Window

Database Management

Creating a Database

Selecting a Database

Renaming a Database

Deleting a Database

Backing up or Restoring a Database

System Configuration

Input to Screen

Switch Nodes

Components

Alarms

Cameras

System Controllers

Digital Recorders

Adding or Removing Cameras for a Defined Recorder

Alarm Input/Output

Monitors

Operators

Automate

Tour Sequences

Group Presets (not currently supported)

Group Sequences (not currently supported)

Event Scheduler

Tools

Log Manager

Areas

Account Manager

Help

Appendix A

digital input

digital output

Appendix B

Glossary

Terms

Index

Worksheets

Teamwork

group sequence

tour sequence