13[Setup] buttonThe following operation panel will be displayed whenthe [Setup] button is clicked.Refer to the setup instructions (PDF) for further informa-tion.q [Quick] buttonDisplays the "Quick" page that contains the mini-mum required settings to be configured to operatethe recorder.w [Basic] buttonDisplays the "Basic" page that contains the basicsystem settings and the time & date settings.e [Emergency rec.] buttonDisplays the "Emergency rec." page that containsthe settings relating to the emergency recording.r [Event] buttonDisplays the "Event" page that contains the settingsrelating to the event actions to be taken at an eventoccurrence for each event type (site alarm, terminalalarm, command alarm).t [Schedule] buttonDisplays the "Schedule" page that contains the set-tings relating to the schedule recording.y [Camera] buttonDisplays the "Camera" page that contains the net-work settings of cameras, and the settings relating tothe group and the sequence display.u [Server] buttonDisplays the "Server" page that contains the settingsof the NTP server, FTP server, mail server and proxyserver.i [Network] buttonDisplays the "Network" page that contains the net-work settings.o [User mng.] buttonDisplays the "User mng." page that contains the set-tings relating to authentication.!0 [Maintenance] buttonDisplays the "Maintenance" page that contains theinformation display pages (about the recorder, diskand network), and the settings relating to the harddisk drives and saving/loading of the settings.!1 [Config.] buttonDisplays the "Disk config." page that contains thedisk partition information display page, the settingsrelating to formatting of the hard disk drives.Important:• When any of edited settings are applied, all loginusers will forcibly be logged out.!2 [Help] buttonThe "Help" page will be displayed.qwertyuio!0!1!2