54Transmit imagesTransmit images from cameras to anFTP ServerIt is possible to transmit images from cameras to anFTP server.Image transmission can be performed at a designatedtime periodically (FTP transmission by periodic timer) orat an event occurrence (FTP image transmission byalarm).Transmit images from camerasperiodicallyIt is necessary to perform the settings on the setupmenu in advance to transmit images from cameras toan FTP server periodically.The settings relating to "Image transmission by periodictimer" such as FTP server directory, transmission inter-val, source camera channel, etc. can be performed onthe setup menu ("Server" - "FTP" - "Image transmissionby periodic timer").Refer to the setup instructions (PDF) for information onhow to configure the settings.When the image compression method of the cameraused for the camera channel selected for "Channel tosend" (under "Image transmission by periodic timer" of"FTP" on the "Server" page) is "MPEG-4", images willnot be transmitted.Transmit images from cameras at anevent occurrenceIt is necessary to perform the settings on the setupmenu in advance to transmit images from cameras toan FTP server at an event occurrence.The settings relating to "FTP image transmission byalarm" such as FTP server name, "Duration-Pre","Duration-Post", etc. can be performed on the setupmenu ("Server" - "FTP " - "Image transmission byalarm").Refer to the setup instructions (PDF) for information onhow to configure the settings.Send mailsA mail that notifies of the event occurrence with the timeand date of the event occurrence will be sent. (Alarmmail)To send alarm mails at an event occurrence, configurethe settings in advance. Refer to the setup instructions(PDF).Note:• It is possible to attach an image to the alarm mail.(Alarm image)• Up to 4 destination addresses of the alarm mail canbe registered.