Panasonic WJ-ND400K/G Operating Instructions Manual

Also see for WJ-ND400K: Operating instructions Manual Specification Setup instructions Specification sheet

Contents

Panasonic WJ-ND400K/G Operating Instructions Manual Manual pdf 68 page image

68TroubleshootingCheck the following before requesting repair. Contact your dealer if a problem cannot be solved even after checkingand trying the solution or a problem is not described below, and when having a problem with installations.Problem Check item/Remedy ReferencepageCannot access from thebrowser.Is the Ethernet cable firmly connected to the 10BASE-T/100BASE-TX port?Confirm the cable is firmly connected.–Is the connection indicator of the 10BASE-T/-100BASE-TX port lit? When it is not lit, connection to a LAN is notestablished or a network is not working correctly.Confirm that the connection indicator of the 10BASE-T/100BASE-TX port is lit. Refer to a system administratorif it is not lit.–Contact your system administrator to confirm that the validIP address is set.SetupInstructions(PDF)Are you accessing the wrong IP address? Check the con-nection as follows:>ping "IP address of this recorder"If there is reply from this recorder, the connection is nor-mal.If not, check the settings of the IP address and the subnetmask.–Is the same IP address provided to other devices?Refer to a system administrator for further information.SetupInstructions(PDF)Are there contradictions between the address and the net-work subnet to be accessed?SetupInstructions(PDF)When the recorder and the client (PC) are on the samesubnet, is the same subnet set for the IP addresses of therecorder and the PC?SetupInstructions(PDF)Is the "Use Proxy Server" checkbox of the browser settingchecked?When accessing this recorder in the same subnet, enter-ing the address of this recorder in the "Don't Use ProxyFor These Addresses" box is recommended.SetupInstructions(PDF)