47Download recorded imagesDownload recorded images currentlybeing playedDesignate the start point and the end point of recordedimages currently being played and download images toa PC.When downloading recorded images, recorded imagesand audio will be downloaded as an image data file (file-name.n3r) and an audio data file (filename.n3a) respec-tively.Refer to page 48 for information on how to play down-loaded recorded images.1 Click the [HDD] tab.2 Enter the desired start time of the download timerange in the [Start] box on the playback pointoperation area.It is also possible to designate the start time by click-ing the [Start] button at the desired point to set asthe start point of the recorded images to be down-loaded. The time and date of the start point will bedisplayed in the playback point operation area.3 Enter the desired end time of the download timerange in the [End] box on the playback pointoperation area.It is also possible to designate the end time by click-ing the [End] button at the desired point to set as theend point of the recorded images to be downloaded.The time and date of the end point will be displayedin the playback position operation area.It is possible to designate up to 20 minutes of thetime range per download.4 Click the [Download] button.The "Download" pop-up window will be displayed.The designated start time and end time will be dis-played in the [Start] and [End] boxes respectively.Note:• Download may start from a point several secondsbefore the designated start time and may end at apoint several seconds after the designated end timewhen downloading MPEG-4 images.5 Click the [OK] button after selecting "With audio"or "Without audio" to determine whether or notto download images with audio and "ON" or"OFF" for "Alter detect" to determine whether ornot to attach an alteration detection code torecorded images to be downloaded.The "File download" window will be displayed.Note:• The download time will be longer when "With audio"is selected or "ON" is selected for "Alter detect".