Panasonic WJ-ND400K/G Operating Instructions Manual

Also see for WJ-ND400K: Operating instructions Manual Specification Setup instructions Specification sheet

Contents

Panasonic WJ-ND400K/G Operating Instructions Manual Manual pdf 31 page image

31Control camerasWhen displaying live images from a camera with thepanning/tilting function on a 1-screen, the followingcamera controls are available. It may be impossible tooperate the camera or some functions may be inopera-ble depending on the model of the camera.Pan/tilt: Adjust the horizontal/vertical position of thecamera.Zoom: Zoom in/out the displayed image.Focus: Adjust the focal point.Brightness: Adjust the lens iris (brightness).Preset position operation: Move the camera to thepreset position (that is determined on the camera'ssetup menu and registered in the recorder).Auto mode: Activate the designated auto function of thecamera.Panning/tilting operationAdjust the horizontal/vertical position of the camera.1 Click the [CAM] tab.Control buttons: Click to move (pan/tilt) a camera inthe clicked direction.Control pad: Click to move (pan/tilt) a camera in theclicked direction. Panning/tilting speed will be fasterif a clicked point gets farther from the center point ofthe control pad.Image display area: Click the desired point to be locat-ed at the center of the angular field of view.The camera will move to locate the clicked point asthe center point in the image display area.Zoom/focus/brightness adjustment operationAdjust the zoom, focus, and brightness of live images.Zoom: Zoom in/out the displayed image. Depending onthe models of the connected cameras, the availablezooming factors may be different. Refer to the oper-ating instructions of the camera in use for furtherinformation.Focus: Adjust the focal point. The auto focus function isavailable.Brightness: Adjust the lens iris (brightness). The adjust-ed lens iris can be reset.1 Click the [CAM] tab.Zoom: Zooming can be adjusted by clicking the [-] but-ton or the [+] button.Click the [x1] button to reset zoom.Focus: Focusing can be adjusted by clicking the [Near]button or the [Far] button.The auto focus function can be performed by click-ing the [Auto] button.Brightness: The brightness can be adjusted by clickingthe [-] (darker) button or the [+] (brighter) button.It is possible to reset the set brightness by clickingthe [Reset] button.Note:• It is also possible to adjust the zoom factor by rotat-ing the wheel button of the mouse.