Panasonic WJ-SX650 Operating Instructions Manual

Also see for WJHD309 - DIGITAL DISK RECORDER: Manual Operating instructions Operating instructions Operating instructions Specifications

Contents

Panasonic WJ-SX650 Operating Instructions Manual Manual pdf 69 page image

69Notes:• Alarm all reset will also be conducted when settingchanges are performed in SETUP MENU or WJ-SX650Series Administrator Console.• To reset the alarms occurred to recorders, performalarm all reset. Alarm all reset is available even while noalarms are occurring.■ Return to Alarm Mode StatusYou can recover from the ACK status to the alarm modestatus.● WV-CU950/650Press the ACK button while holding down the SHIFT button.The alarm mode will be recovered.● WV-CU360C/CJThis operation is not available.■ Alarm SuspensionYou can suspend the unit from accepting alarm input sig-nals when you do not want to be disturbed.1. Press the ALM SUSPEND*1 (or SUSPEND*2) buttonwhile holding down the SHIFT button.The alarm will be suspended.*1 WV-CU950/650*2 WV-CU360C/CJ2. To cancel the alarm suspension mode, press the ALMSUSPEND button while holding down the SHIFT buttonagain.■ Alarm History DisplayThe latest 1 000 alarm records (date, time and details) canbe displayed as the alarm history on an active monitor.Note: Alarm History Display is not available on monitors inthe alarm mode or during recorder selection.● WV-CU950/650Press the ALM RECALL button. The Alarm History Displaywill appear on the selected monitor.● WV-CU360C/CJPress the OSD and ALM H buttons at a time. The AlarmHistory Display will appear on the selected monitor.● Details on Alarm History Display"∗" beside the time indicates daylight saving time (sum-mer time).The following items are display details.• ALARM (Highlighted for reset alarms)T-001 to 256: Terminal alarm(Example: For T-001, "001" means the number ofalarm input signal accepted by the ALARM IN portof video input board.)C-001 to 999: Camera alarm(Example: For C-001, "001" means the number ofcamera supplying an alarm input signal to the unit.)R-001 to 999: Recorder alarm(Example: For R-001, "001" means the number ofcamera associated with the recorder supplying analarm input signal to the unit.)S-0001 to 1024: Serial alarm(Example: For S-0001, "0001" means the serial com-mand alarm input number.)V-001 to 999: Video loss(Example: For V-001, "001" means the number ofcamera to which video loss has occurred)ALL: Alarm all reset: Alarm suspension ON/OFF• ACTIONPOWER: The unit is powered on. (Highlighted: Poweroff)M01 to 32: Alarm occurred to Monitor 1 to 32. (Forgroup sequence and group preset, the smallestmonitor number is displayed with "∗".)C001 to C999: Camera 001 to Camera 999 was activat-ed for spot mode.SALARM HISTORY 1 of 100M D Y H M S ALARM ACTION RECAug31/06∗11:59:00 PM ALL 12345 K4-8Aug31/06∗11:58:00 PM C-999 M32 C100 001Aug31/06∗11:57:00 PM V-001 M03 T32 256Aug31/06∗11:56:00 PM POWERApr15/05∗09:15:25 AM POWERApr15/05∗09:15:25 AM R-003Apr15/05∗09:13:54 AM S-0002 M10*G32 ———Apr15/05∗09:12:32 AM T-001 M20 ——— 999Jan02/05 03:05:10 PM S 6789 PCJan01/05 03:04:08 PM S 101 PSDT-TERMINAL C-CAMERA R-RECORDERS-SERIAL V-VIDEO LOSS SSUSPEND