73This chapter includes operation list, function list, and function menu flow of the terminal mode. Operators can be given restrictlevels for each operation and function according to the user level settings.■ Lists of Operations and Functions• [q] means the q button.• "q + w" means pressing the q and w buttons at a time.• " q → w " means performing q before w.• Refer to p. 47 Menu Flow (WV-CU950/650) for how to recall menu functions.• "CDAB" means the directions to move the joystick.Operation list of WV-CU950/650 and WV-CU360C/CJTERMINAL MODE OPERATIONAlarm recoverMoves the cursor. Joystick CDAB Joystick CDAB• Determines the selectedparameter.• Moves to the sub menu ofSETUP MENU.• Cancels the selection.• Returns to the upper menu.• Closes the search list.[MON (ESC)] [MON (ESC)]Returns the LCD to the defaultstatus.[MON (ESC)] Not available (No LCD on thissystem controller)WV-CU950/650:Exit SETUP MENU before thisoperation. (Pressing the EXITbutton can close SETUPMENU along with this opera-tion.)Moves to the next page. • Shuttle ring clockwise• Zoom wheel controller to therightNot available WV-CU950/650:You can also move to the nextpage by moving the cursor tothe edge.Moves to the previous page. • Shuttle ring counterclock-wise• Zoom wheel controller to theleftNot available WV-CU950/650:You can also move to the pre-vious page by moving thecursor to the edge.Changes the selected para-meter.• [+] or [–]• JogDial clockwise or coun-terclockwise[NEXT] or [PREV]Enters numeric parameters. Numeric buttons Numeric buttonsClears an entry such as apassword.[CLEAR] [CLEAR]Note: Details may differ depending on the function to activate. Along with this list, refer to the operating instructions of systemcontroller.[CAM (SET)] or top button [CAM (SET)]WV-CU950/650 WV-CU360C/CJ Note