138Chapter 5 Internet FaxSetting up a Relayed Transmission NetworkThis section explains how to set up a relayed broadcasting network. What is the Hardware Configuration?A relay network needs the following kinds of equipment:• Internet Fax or computer (Initial Sending Station)• Internet Fax supporting the relayed transmission feature (Relay Station)• G3 fax station connected to the telephone line (End Receiving Station) What is the Communication Charge?• Email is transmitted from the initial sending station to the relay station via Internet, saving both thetime and charges on long-distance calls.• A telephone charge accrues on the fax transmission from the relay station to the end receivingstation. How can I confirm the completion of a transmission?• When the relay station completes a transmission to the receiving station, it transmits a RelayedTransmission Report (Communication Journal) to the initial sending station to report thecompletion of a fax transmission.• The relay station also Emails a Fax Relay Log to the administrator's computer at the relay station. How to Program?•Program required network parameters in your machine. (See page 100)• To use the relayed transmission feature, program the required function parameters in FunctionParameters for Relay Stations (see page 142) and Settings for Initial Sending Station (seepage 143).A sample network is shown on the next page.•Add Relay Station and End Receiving Station to Address Book by referring Sample Entries inAddress Book (see page 140 and page 141) and Adding End Receiving Stations for RelayedTransmission (see page 144 and page 145). To set up relayed transmission network properly,consult authorized Panasonic dealer.
