34Chapter 2 Basic Fax TransmissionVerification StampThis function confirms successful transmission or storageinto the memory by stamping at the bottom of eachsuccessfully transmitted original(s) with a small “x” mark.z The standard setting of the verification is Off. It stamp can be changed with “04 Stamp (HOME)” in FunctionParameters (Fax/Email Settings> Fax Parameters). For instructions on how to change the standard setting,refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.z The machine can be configured not to stamp the documents stored in the memory by changing the setting“28 Stamp at Memory XMT” in Function Parameters (Fax/Email Settings> Fax Parameters). For instructionson how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (ForFunction Parameters) on the provided CD-ROM.z Varification Stamp function is only available when scanned with the ADF.1 Place Original(s).z Refer to Placing Originals (Facsimile/InternetFax) in the Operating Instructions (For BasicOperations) of provided booklet.2 Press the Fax key.3 Select “Basic Menu”.4 Select “Verification Stamp”.5 Set “Quality Adj.” as required.z Refer to Setting Original Quality (see page26).6 Select a destination.z Refer to Entering a Destination (see page16).7 Press the Start key.The original(s) are stored into memory with afile number. Then starts dialing the telephonenumber.z Setting of "Verification Stamp" is returnedto Off after finished transmission.Verification StampEx: ScanningDirection
