Paradyne COMSPHERE 3610 Operator's Manual

Also see for COMSPHERE 3610: Notice Installation instructions Quick reference guide User guide Quick reference guide

Contents

Paradyne COMSPHERE 3610 Operator's Manual Manual pdf 138 page image

COMSPHERE 3600 Series Data Service Units6-10 July 1999 3610-A2-GB91-90Table 6-2(1 of 3)Diagnostic DSU Configuration OptionsDiag Type: DisrNext NonD Disr Mixed None PrevDiagnostic Type. Defines the diagnostic interaction between the control and tributary DSUs. It must be setconsistently for all DSUs on the same circuit.NOTE: If the DSU Rate(Kbps) is set to 64CC, the DSU defaults to 3600e and no other configuration optionswill appear for this option set.NonD — Nondisruptive Diagnostics. An in-band secondary channel transport is derived to carrydiagnostics data between the control and the tributary DSUs. Nondisruptive diagnostics areunavailable using the DMC protocol.Disr — Disruptive Diagnostics. The same (primary) channel that carries user-transmitted data betweenthe control and the tributary DSUs also carries diagnostic data. This mode should be selectedfor compatibility with earlier releases that use session-disruptive diagnostics.Mixed — This mode supports nondisruptive health and status updates. User-initiated commands aresent disruptively. Mixed is unavailable using the DMC protocol and is only selected insingle-port multipoint configurations.None — No diagnostic communications with remote devices; only local diagnostics are allowed.