A. Command Line Interface6300-A2-GB20-10 November 2003 A-29show pppoeMinimum Access Level: OperatorCommand Mode: StandardSample show pppoe display:PPPoE {enabled | disabled}PPPoE stage - {initial | discovery | PPP session}PPPoE session ID - {xYYYY | none}Peer IP address - x.x.x.xPeer MAC address - xx:xx:xx:xx:xx:xxIP passthrough - {enabled | disabled}Passthrough MAC address - xx:xx:xx:xx:xx:xxPPP session state - {initial | starting | closed | stopped |closing |stopping | req-sent | ack-rcvd | ack-sent | opened}Negotiated IP address - x.x.x.x,assigned to {eth1 | dsl1} interface (in use: {eth1 |dsl1})*Negotiated DNS server - x.x.x.x, x.x.x.x,no-dns [not] selectedPPP authentication - {CHAP | PAP | both | none} (in use: {CHAP |PAP | none})*User name user@context (in use: user@context)** In use information only appears when the configured value differs from what isactually used in the current PPP session.show spanning-treeMinimum Access Level: OperatorCommand Mode: StandardDisplays the spanning-tree topology for the router.Sample show spanning-tree display:Spanning tree protocol – enabledBridge ID – priority 120, address 00:00:0d:00:00:00Topology change detected/received – falseTimers (seconds): hello 2, max age 20, forward delay 15,topology change 35, hold 1, aging 300Root ID – priority 120, address 00:00:0d:00:00:00Root path cost – 0Root port ID – priority 128, number 0Port eth1 ID – priority 128, number 1Port eth1 state – disabled *Port eth1 designated bridge – priority 120,address 00:00:0d:00:00:00Port dsl1 ID – priority 128, number 2Port dsl1 state – disabled *Port dsl1 designated bridge – priority 120,address 00:00:0d:00:00:00* Possible values for Port eth1 state and Port dsl1 state are disabled, learning,listening, forwarding, or blocked.Table A-17. Show Commands (6 of 10)
