A. Command Line Interface6300-A2-GB20-10 November 2003 A-33show systemMinimum Access Level: OperatorCommand Mode: StandardSample show system display:March 23009:53:26 2001System ID: xxxxxxxxModel #: xxxx, Serial #: xxxxxxxxxxxx, HW-Rev: xxxBoot: FW-Version xxxxxxxx2nd Stage Boot: FW-Version xxxxxxxxImage 0: FW-Version xxxxxxxx, [active]Image 1: FW-Version xxxxxxxxDSP: FW-Version xxxSelftest Result: [0xxxxx] (if failed) {pass | fail}show telnetMinimum Access Level: OperatorCommand Mode: StandardSample show telnet display:Telnet - {enabled | disabled}Telnet login - {enabled | disabled}Telnet keep-alive - {enabled | disabled}Telnet keep-alive interval: xxxxxx secondsTelnet keep-alive timeout: xxx minutesTelnet disconnect timeout: xx minuteslogin ID access levelxxxx {admin | operator}show trapsMinimum Access Level: OperatorCommand Mode: StandardSample show traps display:warmstart {enabled | disabled}authen fail {enabled | disabled}selftest {enabled | disabled}devfail {enabled | disabled}test start {enabled | disabled}test stop {enabled | disabled}ccn {enabled | disabled}link up {enabled | disabled}link down {enabled | disabled}For additional information, refer to Appendix C, Traps and MIBs.Table A-17. Show Commands (10 of 10)
