A. Command Line InterfaceA-20 November 2003 6300-A2-GB20-10ppp username [username]Minimum Access Level: AdministratorCommand Mode: ConfigSpecifies the CHAP host name or PAP peer ID to use for authentication in the PPPsession when PPP authentication is enabled and successfully negotiated. To delete theuser name, enter this command without specifying a user name on the command line.NOTE: A change to this option does not take effect until the next PPP linkestablishment.username – The PPP user name in the format user@context. The maximum length is127 characters (case-sensitive).ppp password [password ]Minimum Access Level: AdministratorCommand Mode: ConfigSpecifies the CHAP secret or PAP password to use for authentication in the PPP sessionwhen PPP authentication is enabled and successfully negotiated. To delete the password,enter this command without specifying a password on the command line. This commandis not included in the output of the List command.NOTE: A change to this option does not take effect until the next PPP linkestablishment.password – The PPP password. The maximum length is 31 characters (case-sensitive).Table A-13. PPPoE Client Commands (3 of 3)
