Parker compax3s Installation Manual

Also see for Compax3S: Installation manual Operating instructions Quick reference guide Installation manual

Compax3 device description Single axis devices20 192-120102 N16 December 2010Caution!When the control voltage is missing there is no indication whether or not highvoltage supply is available.Attention - PE connection!PE connection with 10mm 2 via a grounding screw at the bottom of the device.Attention - hot surface!The heat dissipator can reach very high temperatures (>70°C)Line cross sections of the line connections X1, X2, X3Compax3 device: Cross-section: Minimum... Maximum[mm 2]S025V2, S063V2 0.25 ... 2.5 (AWG: 24 ... 12)S100V2, S150V2S015V4, S038V4, S075V4, S150V4 0.25 ... 4 (AWG: 24 ... 10)S300V4 0.5 ... 6 (AWG: 20 ... 7)3.3.2. Connector and pin assignment C3SAC - VersorgungAC - Supply X1X10DC - VersorgungDC - Supply X4 (24VDC)Freigabe 24VDCEnable 24VDC X4/3RS232SSK1PCCompax3Further information on the assignment of the plug mounted at the particulardevice can be found below!Overview: