Parker compax3s Installation Manual

Also see for Compax3S: Installation manual Operating instructions Quick reference guide Installation manual

Compax3 device description Single axis devices28 192-120102 N16 December 20103.4 Signal interfacesIn diesem Kapitel finden SieRS232/RS485 interface (plug X10) .................................................................................. 28Resolver / feedback (plug X13) ........................................................................................ 29Analogue / encoder (plug X11) ........................................................................................ 30Digital inputs/outputs (plug X12) ...................................................................................... 313.4.1. RS232/RS485 interface (plug X10)Interface selectable by contact functions assignment of X10/1:X10/1=0V RS232X10/1=5V RS485PIN X10 RS232 (Sub D)1 (Enable RS232) 0V2 RxD3 TxD4 DTR5 GND6 DSR7 RTS8 CTS9 +5VRS485 2-wirePIN X10 RS485 2-wire Sub DPin 1 and 9 externally jumpered1 Enable RS485 (+5V)2 res.3 TxD_RxD/4 res.5 GND6 res.7 TxD_RxD8 res.9 +5VRS485 4-wirePIN X10 RS485 4-wire Sub DPin 1 and 9 externally jumpered1 Enable RS485 (+5V)2 RxD3 TxD/4 res.5 GND6 res.7 TxD8 RxD/9 +5VUSB - RS232/RS485 converterThe following USB - RS232 converters were tested: ATEN UC 232A USB GMUS-03 (available under several company names) USB / RS485: Moxa Uport 1130http://www.moxa.com/product/UPort_1130.htm Ethernet/RS232/RS485: NetCom 113 http://www.vscom.de/666.htmIf X10 at the control unit is used, the programming interface as well as theexternal device status LEDs are out of order due to the removal of the X10jumper (VBK17/01)!Note on Compax3H