Philips 4000 Series User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

65BDL4650D/75BDL4650D/86BDL4650D132.2. Package ContentsPlease verify that you received the following items with your package content:• LCD display• Quick start guide• Remote Control and AAABatteries• Power cord• RS232 cable• RS232 daisy chain cable• IR sensor cable• USB cover• AC Switch cover• Cable Clip x 2PCS• Philips logo plate• CRD22 Wi-Fi module* The supplied power cord varies depending on destination.CRD22 Wi-FimoduleLCD display Remote Controland AAA BatteriesQuick start guideRS232 DaisyChain CableRS232 CablePhilips logoplateIR Sensor CablePower CordUSB Cover Cable Clipx 2PCSAC SwitchCover x 1Signage Display4000 Series65BDL4650D75BDL4650D86BDL4650D* Differences according to regions.* Display design and accessories may differ from those illustrated above.NOTES:• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by andcomplies with the safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm2 should be used).• Keep the packaging materials appropriately after unpacking the product.2.3. Installation Notes• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.• The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the productand the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure todo so may shorten the life of the internal parts.• Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.