Philips 4000 Series User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

65BDL4650D/75BDL4650D/86BDL4650D67Mode 3: [TCP on, WOL off, auto on/off]DC off -> Back light off, LED: RedPower Save -> Back light off, LED: Orange. Can bewoken up.Mode 4: [TCP on, WOL off, no auto on/off]DC off -> Back light off, LED: RedPower Save -> Will not enter power save mode. Itshows “no signal” only.Mode 3DC OFF:Backlight Off onlyPower Save:Backlight Off onlyMode 1(default)DC OFF:Power OffPower Save:Power OffMode 4DC OFF:Backlight Off onlyPower Save:No signal(Backlight On)Mode 2DC OFF:Power OffPower Save:Power SavingDC off/on: Press power button by RCScaler FW UpdateUpdate scalar FW by USB.NOTE: Only USB 2.0 flash disk is supported.Information OSDSet the period of time that the information OSD is displayed onthe upper right corner of the screen. The information OSD willdisplay when the input signal is changed.The information OSD will remain on the screen with {Off}selection.The options are: {Off, 1 ~ 60} seconds.Advanced option resetReset all settings except {Date and Time} in the Advancedoption menu to factory preset values.1. Press [OK] or [ ] button to enter the submenu.2. Press [ ] or [ ] button to select {Reset} and press the [OK]button to restore settings to factory preset values.3. Press the [ ] button or select {Cancel} and press the [OK]button to cancel and return to the previous menu.