Philips 4000 Series User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

65BDL4650D/75BDL4650D/86BDL4650D64Monitor informationShow information about your display, including model number,serial number, operating hours and software version.Monitor informationModel nameSerial NO.Operator hoursSW VersionXXXXXX74 H 33 MV0.217DP VersionThe options are: {DP 1.1} / {DP 1.2}. The default setting is {DP1.1}.HDMI edidThe option are: {HDMI 1.4} / {HDMI 2.0}. The default setting is{HDMI 1.4}.NOTE: HDMI 2.0 option is to support HDMI 2.0 equipment.Window selectionSelect the window for adjusting the settings. The selectedwindow will be highlighted with green frame.The options are: {Main}(Default), {Sub 1}, {Sub 2} , {Sub 3} .RGB RangeThe options are: {Auto} / {Full (PC)} / {Limited (Video)} Thedefault setting is {Auto}.RotationSet the rotation of Main/Sub/OSD• Auto Rotate : Off/On,Default : OffAuto Rotate: {Off}, {On} when value is On,automaticallydetect whether the PD rotation, Off is set by OSD.• OSD Rotate : Landscape/Portrait,Default : LandscapeOSD Rotate: {Off}, {On} when value is on, OSD rotate 270 °,Off is restored.• Image rotation: Off/On,Default : OffImage rotation: {Off}, {On} when value is on, all Windowscreen with the support input source* rotate 270 °, Off isrestoredSupport input source: Media Player / BROWSER / PDF Player /Custom / InteractNOTE: When the Main / Sub1(2/3) in PIP/PBP mode is one ofthe support input source, the rotation is given priority to thelast setting.LanguageSelect the language used in the OSD menu.The options are: English/Français/Deutsch/Español/Italiano/ 简体中文 / 繁體中文 /Português/ 日本語 / Polski / Türkçe / Русский/ ةيبرعلا / Danish / Svenska / Suomi / Norsk / Nederlands /Čeština / Eesti / Latviešu / Lietuvių.Configuration2 resetReset all settings in Configuration2 menu to the factory presetvalues.7.2.7. Advanced option menuAutoActionActionActionOffActionActionActionActionActionInput resolutionIR controlKeypad controlTilingOff timerDate and timeScheduleAuto RestartHDMI with One WireAuto Signal DetectionPictureScreenAudioPIPConfiguration 1Configuration 2Advanced OptionInput resolutionSet the resolution of VGA input. This is only required when thedisplay is unable to detect the VGA input resolution correctly.NOTE: This item applies to VGA input only.The options are:• {1024x768 / 1280x768 / 1360x768 / 1366x768}• {1400x1050 / 1680x1050}• {1600x1200 / 1920x1200}• {Auto}: Determines the resolution automatically.The selected settings will become effective after turning off thepower and turning it on again.IR controlSelect the operation mode of remote control when multipledisplays are connected via an RS232C connection.• {Normal} - All displays can be operated normally by theremote control unit.• {Primary} - Designate this display as the primary display forremote control operation. Only this display can be operatedby the remote control.• {Secondary} - Designate this display as the secondary display.This display can not be operated by the remote control, andwill only receive the control signal from the primary displayvia the RS232C connection.• {Lock All} / {Lock all but Volume} / {Lock all but Power}/ {Lock all except PWR & VOL}- Lock the remote controlfunction of this display. To unlock, press and hold the [ ]INFO button on the remote control for 5 (five) seconds.NOTE:1. [ ]Hot key to display the Primary / Secondary OSD2. Press [ ] or [ ] button to display the Primary / SecondaryOSD in the case of DisplayPort / VGA / DVI-I / HDMI1 /HDMI2 and no OSD display.3. In the Primary OSD, press [ ] or [ ] button to adjust thevalue of {Control Monitor ID}, and press [ ] or [ ] buttonto adjust the value of {Control Group ID}.Keypad ControlSelect to enable or disable the display keyboard (controlbuttons) function.• {Unlock} - Enable the keyboard function.