Philips 40PFL4911 User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

Note(s)• Digital caption service that you can switch differs depending on the broadcast description.• Closed Captioning service may not be controlled by this unit’s menu options if you are watchingtelevision through an external Cable or Satellite Set-top Box. In which case you will need to usethe menu options on the external set-top box to control Closed Captioning.• The captions do not always use correct spelling and grammar.• Not all TV programs and product commercials include Closed Caption information. Refer toyour area TV program listings for the TV channels and times of Closed Caption shows. Thecaptioned programs are usually noted in the TV listings with service marks such as CC.• Not all captioning services are used by a TV channel during the transmission of a Closed Captionprogram.• Closed Caption will NOT be displayed when you are using an HDMI or a Componentconnection.• To show the Closed Caption on your TV screen, broadcast signal must contain the ClosedCaption data.• Not all TV programs and commercials have the Closed Caption or all types of the ClosedCaption.• Caption's and Text may not exactly match the TV voice.• Changing channels may delay the Closed Caption for a few seconds.• Adjusting or muting the volume may delay the Closed Caption for a few seconds.• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pacewith the on-screen action. This is not a malfunction.• The caption or text characters will not be displayed while the Home menu or functions displayis shown.• If a black box appears on the TV screen, this means that the Closed Caption is set to the textmode. To clear the box, select CC-1, CC-2, CC-3 or CC-4.• If the unit receives poor quality television signals, the captions may contain errors or there mightbe no captions at all. Some possible causes of poor quality signals are:–Automobile ignition noise–Electric motor noise–Weak signal reception–Multiplex signal reception (ghosts or screen flutter)–Data dropout and Pixelation (for DTV only)• The unit retains the Closed Caption setting if the power fails.• When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a VCR’svideo Output channel (ch3 or ch4), the unit may not display the correct caption or text.• The EUT setting that satisfies § 79.102 (e) is as follows:–Font: Mono-font–Character size: LargeSleeptimerSleep timer can set the unit to go into Standby mode after an incrementalperiod of time.1 Use to Select Sleeptimer, then press OK.2 Use repeatedly to change the amount of time(increases the time by 5 minutes up to 180 minutes).• Each press of will decrease the time by 5 minutes.• Press INFO once to call up the display for checking the remainingtime.• To cancel the sleep timer, press repeatedly until “0” isdisplayed.Digital audio preferencesYou can set the interpretive broadcasting by an audio explanation.1 Use to Select Digital audio preferences, then press OK.Power indicatorDigital audio preferencesSleeptimerCaption settingsPrimary audio selection criteriaAudio languageAccessibilityAccessibilityto prioritize VI-Visually Impaired Streaming or HI-Hearing Impaired Streaming: The setting forHandicapped users (Main audio, VisuallyImpaired or Hearing Impaired).Audio language to set your Preferred language in the AudioStreaming (English, Spanish or French).Primary audioselection criteriato set TV Priority based on either of the aboveSettings: (Accessibility or Audio language).Power indicatorTo set power indicator On or Off.1 Use to Select Power indicator, then press OK.Power indicatorDigital audio preferencesSleeptimerCaption settingsOnOffInstallation1 Press and use to Select Setup then press OK.2 Use to Select TV settings, then press OK.3 Use to Select Installation, then press OK.InstallationFeaturesSoundPictureRestore default settingsPreferencesLanguage4 Adjust the following items.31 .EnglishContinued on next page.