Philips 40PFL4911 User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

Manually enter your SSIDSet up the connection to the AP (e.g. Wireless Router) manually byentering the SSID.3 Use to Select Manually enter your SSID, then press OK.• AP (e.g. Wireless Router) SSID entry screen will appear.Enter the SSID using , then press OK.4 Use to Select the authentication setting of the selected wirelessnetwork.• For a wireless network with authentication setting, select theauthentication setting, according to the security type of the wirelessnetwork.XXXXXXXXXXXXXXWEPNoneManually enter your SSIDAutoOthersNone Set the authentication setting to None.WEP Set the authentication setting to WEP*.Others Set the authentication setting to Others• For a wireless network without authentication setting, select None.• If you select WEP* or Others, WEP* / others Key entry screen will appear.Enter the WEP* / others key of the selected wireless network using , then press OK.• Confirmation message will appear. Select Yes to complete the settings.* WEP is not recommended to be used due to its Major security flaws.Change the Security protocol on the Wireless Router to others(recommended) mode.IP configurationIn following cases, select IP configuration to set each setting asnecessary.–When Connection Test failed with the setting of Connection test.–When instructed by your Internet service provider to make specificsettings in accordance with your network environment.2 Use to Select IP configuration, then press OK.3 Use to Select a setting, then press OK.ManualAutoMAC addressSecondary DNSPrimary DNSDNS setting modeDefault gatewaySubnet maskIP addressIP setting modeProxy configurationIP configurationWireless network settingNetwork selectionIP settingmodeAuto Sets the IP setting automatically.Manual Sets the IP setting manually.IP address *1, 3A set of numbers which are assigned todevices participating in a computernetwork.Subnet mask *1, 3 A mask which is used to determine whatsubnet an IP Address belongs to.Default gateway *1, 3 IP Address of the network device (such asrouter) which provides Internet access.DNS settingmodeAuto Sets the DNS setting automatically.Manual Sets the DNS setting manually.Primary DNS *2, 3 A server which handles the name and IPAddress over the Internet.Secondary DNS *2, 3 A server which handles the name and IPAddress over the Internet.MAC addressAn address which recognizes the devicesconnecting to the network. It is also calledHardware Address.*1 Items can be selected only when IP setting mode is set to Manual.*2 Items can be selected only when DNS setting mode is set toManual.*3 Use or the NUMBER buttons to input numbers. When you use to input numbers, then press OK or input the triple digits byusing the NUMBER buttons, the cursor moves to the next entry field.When you use to input numbers, then press OK or input thetriple digits by using the NUMBER buttons at the rightmost entryfield, numbers will be stored and go back to the previous menu.Note(s)• The range of input numbers is between 0 and 255.• If you enter a number larger than 255, the number will automatically be 255.• The manually entered number will be saved even if you change the setting to Auto.• If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.• If the entered IP Address or the default gateway or primary DNS number is same as the defaultsetting, IP Address setting will be set to Auto. (The manually entered number will be saved).• When IP address setting is set to Manual, the setting of DNS setting will automatically be Manualand when IP address setting is set to Auto, you can set either Auto or Manual for DNS setting.39 .EnglishContinued on next page.