Philips 40PFL4911 User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

Use Philips EasyLinkYour TV supports Philips EasyLink, which enables one-touch play andone-touch Standby between EasyLink-compliant devices. Compliantdevices must be connected via an HDMI connector.OOne-touch playWhen you connect your TV to devices that support one-touch play, youcan control your TV and the devices with one remote control. Forexample, when you press (Play) on your DVD remote control, your TVautomatically switches to the correct channel to show the DVD content.One-touch StandbyWhen you connect your TV to devices that support Standby, you can useyour TV remote control to put your TV and all connected HDMI devicesin Standby mode. You can perform one-touch Standby using the remotecontrol from any of the connected HDMI devices.System audio controlWhen you connect your TV to HDMI CEC compliant devices, your TV canswitch automatically to play audio from the connected device. To useone-touch audio, you must map the audio input from the connecteddevice to your TV. You can use the remote control from the connecteddevice to adjust the volume.Remote control (RC) key forwardingRC key forwarding allows you to control EasyLink-compliant devicesusing your TV remote control.HDMI-ARC (Audio Return Channel) (HDMI 1 only)HDMI-ARC allows you to use Philips EasyLink to output TV audio directlyto a connected Audio device, without the need for an additional DigitalAudio cable. Be sure that the device is HDMI CEC and ARC compliant, andthat the TV is connected to the device using an HDMI cable attached toboth HDMI-ARC connectors.Note(s)• Philips does not guarantee 100% interoperability with all HDMI CEC devices.• The EasyLink-compliant device must be Switched On and selected as the source.EasyLink (HDMI CEC)This function allows you to operate the linked functions between ourbrand Devices with a EasyLink feature and this unit connecting throughan HDMI cable. You must connect this unit to our brand EasyLink devicesand be sure its EasyLink (HDMI CEC) setting is also set to On.1 Use to Select Preferences, then press OK.2 Use to Select EasyLink, then press OK.3 Use to Select the item you want to adjust, then press OK.OnOffHDMI-ARCRC key forwardingAuto TV OnMaster EasyLinkE-stickerTV placementEasyLinkLocationSet the Master EasyLink to On or Off. The following additional settingswill be grayed out when you set them to Off.MasterEasyLinkOff Disables All EasyLink.OnSelects if you have connected anExternal Device that is compatible withthe EasyLink function.This unit will Turn On when the Power On signal is sent from yourconnected EasyLink device.Auto TV OnOffThis unit stays in Standby mode evenif you Turn On your connectedEasyLink device.OnThis unit Turns On Automatically whenyou Turn On your connected EasyLinkdevice.You can operate some functions such as disc playback or call up themenu of the connected devices, by using this unit’s remote control.RC keyforwardingOff Disable RC key forwarding.OnPLAY, PAUSE 1 / STOP. /FWD/ / REV0 / VOL + / – / (MUTE) / OPTIONS / / OK /BACK / the NUMBER buttons canbe used to control your connectedEasyLink devices by this unit’s remotecontrol.Note(s)• Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)compliant.HDMI-ARC allows you to use Philips EasyLink to output TV Audio directlyto a connected Audio device, without the need for an additional DigitalAudio cable.HDMI-ARC(HDMI 1 only)Off Disable HDMI-ARC.OnYou can output TV Audio through theHDMI cable solely, provided both theTV and device are HDMI-ARCcompliant.Return your settings to default valuesYou can return settings to their default values.1 Use to Select Restore default settings, then press OK.2 Use to Select Reset AV settings or Reset all settings, then pressOK.Reset AV settingsReturn picture and sound settings to their defaultvalues. The channel installation settings are notaffected.Reset all settings Return all the settings to their default values.33 .EnglishContinued on next page.