User Manual95.2.1 Camera setupExplanation::::1. The modifications will be available after clicking [APPLY] button on the bottom of the sub-menu windowsand being prompted to save and then clicking [ok] button.2. If you want to cancel the modification, click [Exit] button to exit the menu.3. When clicking [DEFAULT] button, all system default values will be reset to default value.4. System default value indicates the value pre-set at the factory.5.2.2 Record setupGo to [Main Menu Camera] to set up the name displayand position display of each channel (Shown as Picture 5-3), Youcan also adjust image brightness, saturation, contrast and huesettings of each channel after entering into [Color] Menu and setup whether each channel can be previewed or not under Livedisplay and/or Recording mode.Please note that the name of each channel supports up toeight characters or four Chinese characters.Click [Main Menu] [Record] to enter into [Record Setup]menu (Shown as Picture 5-5)Functions:1. The [Rec Mode] button allows you to setup recording 24hours, on motion, or on a set schedule.2. [PACK time] indicates maximum continuous time length ofrecorded files (15, 30, 45, 60 min).Below is the Color Menu where you can adjust imagebrightness, saturation, contrast and hue parameters of eachchannel. (shown as picture 5-4)Picture 5-4Picture 5-5Picture 5-3Click [AUTOSEQ] button to start auto rotation function.(setting sub menu shown as Picture 5-4A. After starting autorotation function, system will auto rotate the video images amongCH1, CH2, CH3, CH4 and Quad in turn.Default rotation time: 5 secondSettable time range: 0~10 secondPicture 5-4A