Q-See QSDR04RTC User Manual
Also see for QSDR04RTC: Quick installation guide
                                         | |
Contents
|
User Manual28Chapter 6: Net-Viewer Program6.1 Plug-ins download and installationOpen IE browser and input IP address and web port of DVR, such as http://172.18.6.202 and confirm todownload and install webcam. If your computer is connected to internet, computer will auto download andinstall the webcam.Reminder: If the webcam is not downloaded successfully, please check if your browser’s safety level orfirewall setting is too advanced. Also refer to section 5.2.3 Network Setup to make sure network configurationis correct, ports are forwarded correctly, and ActiveX is enabled.6.2 Log-in to NetViewerAfter webcam installs plug-ins, please select log-inlanguage (Chinese or English) and enter password andclick [Log-in] button, and now you can view DVRremotely through NetViewer.Please note default password is empty. Systemallows Administrator to set new password as perinstructions in section 5.2.6.2 - [Password set] menu.Note: If you want to delete old IE webcam at DVRsystem update, run the command characters:“regsvr32/u dvrocx.ocx”After successful Log-in to Net-viewer, system willenter into live display interface and connect toaudio/video feed automatically (shown as Picture 6-2).Picture 6-1Picture 6-2 |
Related manuals for Q-See QSDR04RTC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine