Q-See QSDR04RTC User Manual

Also see for QSDR04RTC: Quick installation guide

User Manual18Email Alarm Notification(to send notice to email account when motion alarm is triggered)Please set SSL to “On” via Gmail.com server, and set to “Off” via other mail server.If your setting is still not right, please contact the web site where you have applied for your email box toget SMTP server and SSL of mail box.SMTP Port: indicates sender port of SMTP server. Generally the SMTP port value is 25, butthere are exceptions, for example, SMTP port of G-mail server should be 465.SMTP server: indicates server address you use.Sender email: indicates sender’s email address. The email address should be consistent with the serveryou use. That is to say, when you use email address – aaa@gmail.com, the according server should besmtp.gmail.com.Receiver address: indicates receiver’s email address. The email address is used to receive image transmitted from motion detection alarm of DVR. Please clear the images you have received asClick the [Email setup] menu to enter into its sub menu(shown as Picture 5-33).Picture 5-33On the [Email setup] mode, refer to its parameter setupshown as picture 5-34 when setting email alarm to “on”.SSL: is a security link transport protocol. You can encrypt yourcommunication info (including your email) using SSL to prevent hackers frommonitoring your email or communication info and even your password.Picture 5-34Picture 5-35