Q-See QSDR04RTC User Manual

Also see for QSDR04RTC: Quick installation guide

User Manual19soon as possible to avoid overloading your email account. For detailed SMTP protocols settingsrefer to the below picture 5-35A.5.2.6.3 PTZ Setup5.2.6.4 MobileMobile Phone AccessThe DVR is currently compatible with mobile phones running Windows Mobile and Symbian operatingsystems on 3G networks.Before you can access the DVR from a mobile phone you need to setup the Network Configuration onthe DVR. Go to section 5.2.3 Network Setup on page 14 of the product manual for instructions on how to dothis. You also need to go to the Main Menu then Devices then Mobile and enter your user name andpassword, and set the Server Port to 18600. This port also needs to be forwarded to the IP address of theDVR along with the ports from 5.2.3 Network Setup.Explanation: You can only see one channel at a time when viewing from a mobile phone. Thespeed of the display depends on the speed of the internet connection.Enter into [Main menuDevice PTZ Setup] to selectthe channel you want to control and set PTZ protocol(Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600),Stop bit (1, 2), Parity Check (None, Odd, Even Mark Space),Address Code and Cruise status respectively. Please notethe above mentioned channel settings must match thesettings of the PTZ camera.Click [Main menuDeviceMobile] to enter into [Mobile]menu.User Name: indicate user name of DVR.User password: indicate user password of DVRServer port: Mobile monitoring port. Setting range is between1024 and 65535. Please note thatExplanation: Please connect DVR to Internet beforesetting DVR port number and the server port no is not equal tonetwork menus.Picture 5-37Picture 5-35APicture 5-36