QUORION QMP 3000 User Manual

Contents

QUORION QMP 3000 User Manual Manual pdf 31 page image

316.4 Using CondimentsCONFIGURING THE SYSTEM USING QPROGBefore you can use condiment selection you must activate the condiment table file andcondiment selection option in the configuration of the application program. As an examplethe system will be setup for maximum 16 condiment tables selection on PLU level. PLU #1 will be programmed as STEAK and for compulsory selection of Condiment Table# 1 and2. Table# 1 will be used for prompting RAW, MEDIUM, WELL DONE and Table# 2 will beused for FRENCH FRIES, BOILED POTATOES, BAKED POTATOES. This example canbe used on a 2 line or 8 line display the only difference is the number of condiments shownon the display. Note that on the 2 line display the Condiment Table name is not shown.1 – CONFIGURE CONDIMENT TABLES FILE• Open: QPROG->CONFIG->CONDIMENT TABLE• Set number of condiment tables to 16. (The maximum number which can be usedfor prompting is 32).• Set the name length to 16 (This name is shown on the display when the table isdisplayed).• Set number of condiments in a table to 7 (On the multiline display maximum 7condiments are displayed in one screen but it is possible to use more then 1screen).• Confirm by pressing OK2 – CONFIGURE PLU FILE FOR CONDIMENT PROMPTING• Open: QPROG->CONFIG->PLU FILE• Set Condiment Selection to 16. (The max. number of tables for prompting is 32).• Confirm by pressing OK3 – CONFIGURE MODIFIER FILE• Open: QPROG->CONFIG->MODIFIER FILE• Set the number of Modifiers to 50.• Set the name length to 16.• Confirm by pressing OK4 – PROGAM MODIFIERS USED IN CONDIMENT TABLES• Open: QPROG->FILES->MODIFIERS• Program Modifier# 1: RAW• Program Modifier# 2: MEDIUM• Program Modifier# 3: WELL DONE• Program Modifier# 11: FRENCH FRIES• Program Modifier# 12: BOILED POTATOES• Program Modifier# 13: BAKED POTATOES5 – PROGRAM CONDIMENT TABLE# 1 and 2• Open: QPROG->FILES->CONDIMENT TABLES• Select Condiment Table# 1• Enter Name PREPARATION• Set OPTION 1-1, Compulsory Selection• Click on LIST Column• Enter Key code 4001, 4002 and 4003 for Modifier 1, 2 and 3.• Select Condiment Table# 2• Enter Name POTATOES• Set OPTION 1-1, Compulsory Selection