QUORION QMP 3000 User Manual

Contents

QUORION QMP 3000 User Manual Manual pdf 53 page image

5315. Test RoutinesThere are a number of procedures available in the register which can be used to test thehardware, reset the reports and test the transaction load by simulating transactions. Thetests are started by entering a number on the TYPE key. The following are available:301 – PRINTER FONT TEST PROCEDURE1. Turn Lock to P (also X or Z when allowed)2. Enter 301 on the TYPE key3. The register will print the version information on the receipt printer.B: Qboot Rel. 2.00 BOOT versionF: 1-WE Display Font Table (WE = Western Europe)P: T2020711 Flash ROM versionC: QMP3282GB Standard-ConfigurationD: 06-LTP2342-WE Printer driver versionRAM: 1536K Total Memory4. Printout of complete font table5. Finished302 (or 303) – ALL DISPLAY TEST PROCEDURE1. Turn Lock to P (also X or Z when allowed)2. Enter 302 (or 303) on the TYPE key3. Display Test Start and all characters (0x20 to 0xFF) in all available modes aredisplayed.4. Finished305 – VERSION PRINT PROCEDURE1. Turn Lock to P (also X or Z when allowed)2. Enter 305 on the TYPE key3. The register will print the version information on the receipt printer.B: Qboot Rel. 2.00 BOOT versionF: 1-WE Display Font Table (WE = Western Europe)P: T2020711 Flash ROM versionC: QMP3282GB Standard-ConfigurationD: 06-LTP2342-WE Printer driver versionRAM: 1536K Total Memory306 – RE-INIT PRINTER LOGO’S1. Turn Lock to P (also X or Z when allowed)2. Enter 306 on the TYPE key3. The Printer logo(‘s) will be sent to the printer controller. all available modes aredisplayed.4. Finished

/ 55

Related manuals for QUORION QMP 3000