A – Log MessagesFatal Log MessagesSN0051102-00 A A-25ASystemThe system modules generate the error log messages listed in Table A-12 anddescribed following the table.Fatal Log MessagesThe following sections list and describe the fatal log messages by reportingmodule: “iSCSI Driver” on page A-25 “FC Driver” on page A-28 “TOE Driver” on page A-30 “System” on page A-31iSCSI DriverThe following fatal log messages are common to both iSCSI ports, 1 (GE1) and 2(GE2). They are listed in Table A-13 and described following the table. Logmessages beginning with #0 denote iSCSI port 1 (GE1). Log messages beginningwith #1 denote iSCSI port 2 (GE2).Table A-12. System—Error Log MessagesID Log Message No.237572 "Failed to kill sys killer %d\n" 4237573 "Temperature over high threshold %d\n" 54 Failed to kill system task.5 Reporting router exceeds maximum operating temperature.Table A-13. iSCSI Driver—Fatal Log MessagesID Log Message No.69652 #%d: qlutm_init: Diagnostic failed, invalid SRAM 2069653 #%d: qlutm_init: Diagnostic failed, fail reboot 2169654 #%d: qlutm_init: Diagnostic failed, invalid NVRAM 2269655 #%d: qlutm_init: Diagnostic failed, invalid DRAM 2369656 #%d: qlutm_init: Failed to return diagnostic result to Bridge 24
