4 – Using the WizardsFCIP Route Add WizardSN0054660-00 A 4-47AThe Local and Remote IP Address dialog box requests entry of IPaddresses (see Figure 4-56).Figure 4-56 FCIP Route Add Wizard—Local and Remote IP Address Dialog Box5. Configure any of the following parameters: Local IP Address – Enter the IP address the GigE port will use. Anuninitialized port has an IP address of all zeros. Subnet Mask – Enter the subnet mask the GigE port will use. Gateway IP Address – Enter the gateway IP address the GigE portwill use. Remote IP Address – Enter the IP address of the GigE port the GigEport will use on the remote router.6. After setting the IP address parameters, click Next to continue or clickCancel to quit the wizard.
