4 – Using the WizardsMap Remote Initiator/Target WizardSN0054660-00 A 4-33AMap Remote Initiator/Target WizardThe Map Remote Initiator/Target Wizard provides a set of dialog boxes that walkyou through the steps required for mapping an initiator to a target, one of which isremote and the other local.You can start this wizard at any time by selecting Map Remote Initiator/TargetWizard from the Wizards Menu or from the Action Menu.When the Map Remote Initiator/Target Wizard launches, the Device Selectiondialog box displays a list of devices, as shown in Figure 4-38. If necessary,expand the router tree to see the attached devices.Figure 4-38 Device Selection Dialog BoxTo create a remote-to-local mapping between an initiator to a target:1. Select the device to be mapped. The device may be a target or an initiatorand may be either on the remote router or on the local router.2. Click Next.
