4 – Using the WizardsFCIP Route Add WizardSN0054660-00 A 4-49A VLAN ID – Provides a text field you can use to enter the VLAN ID. Thisoption is available only when VLAN is enabled. The VLAN ID must bethe same on both routers participating in the FCIP route (that is, localand remote routers must be using same VLAN ID) and the Ethernetswitches. VLAN Priority – Provides a drop-down box that contains eight optionsfor the VLAN priority: any number between 0–7. This dialog box isavailable only when VLAN is enabled.8. After setting the TCP/IP parameters, click Next to continue or click Cancelto quit the wizard.The FCIP Options dialog box requests entry of FCIP parameters, as shownin Figure 4-58.Figure 4-58 FCIP Route Add Wizard—FCIP Options Dialog Box9. Configure any of the following parameters: FCIP Timestamp – Provides a drop-down box you can use to enableor disable FCIP timestamps. The default is enabled. Error Detect Timeout – Provides a drop-down box you can use toselect one of five options for the error detect timeout: any numberbetween 1 to 5 seconds. The default is one second. Resource Allocate Timeout – Provides a drop-down box you can useto select one of five options for the resource allocate timeout: anynumber between 1 to 5 seconds. The default is one second.
