A – Log MessagesError Log MessagesA-18 SN0054660-00 ASiSCSI DriverThe following error log messages are common to both iSCSI ports, 1 (GE1) and 2(GE2). They are listed in Table A-9 and described following the table. Logmessages beginning with #0 denote iSCSI port 1 (GE1). Log messages beginningwith #1 denote iSCSI port 2 (GE2).Table A-9. iSCSI Driver—Error Log MessagesID Log Message No.73990 #%d: QLUtmIoctlEnable: Initialize FW failed 26274046 #%d: QLPortUp: MBOX_CMD_SET_PORT_CONFIG %04xfailed %04x31874056 #%d: QLRunDiag: MBOX Diag test internal loopbackfailed %x %x32874057 #%d: QLRunDiag: MBOX Diag test external loopbackfailed %x %x32974065 #%d: QLPortDown: MBOX_CMD_SET_PORT_CONFIG %04xfailed %04x33774241 #%d: QLiSNSEnableCallback: iSNS Server TCP Connect failed 51374577 #%d: QLIsrDecodeMailbox: NVRAM invalid 84974587 #%d: QLIsrDecodeMailbox: Link down 85974656 #%d: QLReadyTimer: Adapter missed heartbeat for %d sec-onds. Time left %d92874661 #%d: QLTimer: Abort pTpb=%p, Type %x, Timeout 0x%x Drv-Count 0x%x, DdbIndex 0x%x93374663 #%d: QLReadyTimer: MBOX_CMD %04x %04x %04x %04x%04x %04x %04x %04x timed out93574665 #%d: QLReadyTimer: QLiSNSReenable failed 93774784 #%d: QLUpdateInitiatorData: No more room in Initiator Database 105674800 #%d: QLSetTargetData: No more room in Target Database 1072262 The iSCSI processor failed firmware initialization.318 The iSCSI processor command to enable a GE port failed.328 The iSCSI processor failed the internal loopback test.
