Fibre Channel CableTo Host or SwitchDrive 1Drive 2Drive 3Drive 4Drive 5Drive 6TerminatorsFCOExecutive PCBASCSI Channel 0SCSI Channel 1Figure 4-4 TLS-46xxx Cabling Diagram using AIT-3 Tape DrivesConnectors on Rear of FCO Connectors on Rear of TLS-46xxxFCO: SCSI Channel 0 Medium ChangerTape Drive 1 (T1)Tape Drive 2 (T2)Tape Drive 3 (T3)FCO: SCSI Channel 1 Tape Drive 4 (T4)Tape Drive 5 (T5)Tape Drive 6 (T6)FCO: Serial JumperTable 4-4 Preferred TLS-46xxx Fibre Channel Option Cable Connections for AIT-3 Tape Drives4.4 Cabling for TLS-8000 and 88xxx LibrariesPrior to installing a Fibre Channel Option on TLS-8000 or 88xxx libraries the tapedrive assemblies may need to be installed in the library and the drives will need to becabled as shown in this section. Refer to the Installation section in the TLS-5000/6000/8000 Installation and Operation Manual (Qualstar document number501450) for details about tape drive assembly preparation, enabling SCSI terminationpower and installation.FCO Type C Installation 501440 Rev. J4-6
