501440 Rev. J 5-1FCO Type B Installation5. FCO Type B Installation5.1 Fibre Channel Option (FCO) Type B Installation Considerations5.1.1 Operating EnvironmentA TLS with the Fibre Channel Option is designed to operate in an ambient environ-ment from 41oF to 95oF (5oC to 35oC), 20% to 80% relative humidity, and at altitudesfrom -1000 to +10,000 feet. Moisture must not be allowed to condense inside the sys-tem.5.1.2 VentilationWhen selecting a location for the TLS, be sure to provide sufficient space behind theunit to allow for cable connections. Also, be sure nothing will block the air intake atthe inlet air filters or the top air vent slots. The Fibre Channel Option is designed tobe rack mounted so be sure to allow sufficient space behind the unit to allow for cableconnections and space around it for air flow.5.2 FCO Type B Interconnect CablingAll the bridge/router interconnect and power cables are accessed at the rear of theunit.AC Power ReceptaclePower SwitchSCSI 0SCSI 4SCSI 2SCSI 1SCSI 5SCSI 3SERIALFAIL OVERETHERNETFIBRE CHANNEL 0FIBRE CHANNEL 1SCSI 0LEDSCSI 4LEDSCSI 2LEDSCSI 1LEDSCSI 5LEDSCSI 3LEDAT LED 1(Fibre Channel 1)LK LED 1(Fibre Channel 1)AT LED 0(Fibre Channel 0)LK LED 0(Fibre Channel 0)ST LED(Ethernet)LK LED(Ethernet)ST LEDFT LEDFigure 5-1 Rear View of the Type B Fibre Channel Bridge/Router (FCO)
