7.3.3 Fibre Channel RightThis value defines whether a Fibre Channel Option is currently installed on the rightside of a dual bay library.Fibre Channel Right is a multiple-choice value with the options listed below:NONE No Fibre Channel OptionA Fibre Channel hatch with one Fibre Channel (1Gb) and threeSCSI (Ultra2)B Fibre Channel with two Fibre Channels (2Gb) and six SCSI (Ul-tra160)C Fibre Channel hatch with one Fibre Channel (2Gb) and two SCSI(Ultra160)7.4 Configuration\Advanced\Fibre Channel (Left or Right) MenuCA•••••Fibre•ChannelCA•••••••••••FC•LeftCA••••••••••FC•RightAlarm: NOCh0 FC Speed: AUTOCh1 FC Speed: AUTOCh0 SCSI ID: ddCh1 SCSI ID: ddCh2 SCSI ID: ddCh3 SCSI ID: ddCh4 SCSI ID: ddCh5 SCSI ID: ddCh0 SCSI Speed:160Ch1 SCSI Speed:160Ch2 SCSI Speed:160Ch3 SCSI Speed:160Ch4 SCSI Speed:160Ch5 SCSI Speed:160CLEAR LOGRouter LUN: SOFT•Set TimeThis menu permits control of certain aspects of the Fiber Channel Options operation.7.4.1 AlarmAn audible alarm on the Fibre Channel Option interface is sounded if a warning or er-ror event is reported by the Fibre Channel Option.YES If the Alarm value is set to YES, the audible alarm is enabled.NO If the Alarm value is set to NO, the audible alarm is disabled.7-6 The Configuration Menu 501440 Rev. J
