Quantec Zombies 12xx Series Operation Manual
                                                                                                                                                 | |
Contents
| 
Operation Guide Revision 3.7c©1994 - 2003 Quantec® Tonstudiotechnik GmbH, Munich, Germany110UD SourceThe source of the user data is entered in this submenu item.AES18 Config UDSrc: GL-InputPulsar to the submenu item View UD ChannelPulsar no operation (stop)Exit back to the main menu item AES18 ConfigEnter to the submenu item Set UD SourceToggle no operationHitting ENTER causes an arrow to appear after the colon. The user enters the submenu item SetUD Source.AES18 Config UDSrc:>GL-InputPulsar select UD sourcePulsar select UD sourceExit back to the submenu item View UD SourceEnter to the submenu item View UD Source orSet Block RateToggle no operationTurning the pulsar ( and ) allows the user to select one of the following sources for the userdata: GL-Input The AES18 data packets arriving at the GL input are sent on to the GLoutput. CLK-Input The AES18 packets arriving at the REF input are sent on to the GLoutput. This option is only available on /MX devices. Generate An empty frame (including a system packet) for AES18 packets isgenerated at the GL output. The packets from the GL input are read,but not communicated further to the GL output.It is valid for three settings that incoming AES18 packets with a valid address are integrated intomessages which are sent out via the LL interface. All messages arriving via the LL interface areorganized into AES18 packets and integrated into the data stream at the GL output.EXIT discards the selection and returns the user to the submenu item View UD Source. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine