Quantec Zombies 12xx Series Operation Manual
                                                                                                                                                 | |
Contents
| 
2. Menu Structure - 2.12 AES18 Config (1218 only)ZOMBIEs 12xx123PriorityThe priority of the outgoing messages to be sent is defined in this submenu item.AES18 ConfigPriority: 0Pulsar to the submenu item View RepetitionPulsar to the submenu item View TX AddressExit back to the main menu item AES18 ConfigEnter to the submenu item Set PriorityToggle no operationENTER causes an arrow to appear after the colon, and the user arrives at the submenu item SetPriority.AES18 ConfigPriority:> 0Pulsar select valuePulsar select valueExit back to the submenu item View PriorityEnter back to the submenu item View PriorityToggle no operationTurning the pulsar or allows the user to assign a message priority between 0 (the lowest)and 3 (the highest). The priority defines how quickly a message can be sent.EXIT discards the modification, and returns the user to the submenu item View Priority.ENTER saves the modification, and brings the user to the submenu item Set Priority.When TX Paramter is set to var, this parameter is defined via the serial interface for everymessage and cannot be adjusted here. Where this is the case, the following readout appears in thedisplay:AES18 ConfigPriority: var |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine