2. Menu Structure - 2.9 YAMAHA Interface (1213 only)ZOMBIEs 12xx89RX ChannelThe channel assignment of the YAMAHA Y2 receivers is displayed and can be modified in thissubmenu item .YAMAHA InterfaceRX Channel: std.Pulsar no operation (stop)Pulsar to the previous submenu item RX Audio phaseExit back to the main menu item YAMAHA InterfaceEnter select channel assignmentToggle no operationENTER takes the user to the submenu item Set RX Channel. The channel assignment of theYAMAHA Y2 receivers is displayed and can be selected here.YAMAHA InterfaceRX Channel> std.Pulsar select channel assignment xchg.Pulsar select channel assignment std.Exit discard selected channel assignmentEnter save selected channel assignmentToggle no operationTransposition of the poles of both word clock signal lines of the YAMAHA Y2 interface leads to alogically inverted word clock signal. This means that the channel assignment of the interface isexchanged. It also causes a delay time difference of 1 sample between left and right channels. Thismenu item enables the user to correct errors resulting from faulty equipment or cables without theneed to resort to attacking such equipment with screwdriver and soldering-iron.Turning the pulsar or allows the user to set the channel assignment of the interface toeither std. or xchg. The normal setting is std.ENTER saves the selected setting, and takes the user back to the submenu item View RXChannel.EXIT restores the previous value and also takes the user back to the submenu item View RXChannel.